Interpretation of transient electromagnetic soundings over three-dimensional structures for the central-loop configuration   总被引：2，自引：0，他引：2  

Gregory A. Newman  Walter L. Anderson  Gerald W. Hohmann 《Geophysical Journal International》1987,89(3):889-914

Summary. An assessment is made of the bias of fitting constrained layered-earth models to transient electromagnetic data obtained over 3-D structures. In this assessment we use the central-loop configuration and show that accurate estimates of the depth of burial of 3-D structures can be obtained with layered-earth model fitting. However, layered-earth interpretations are not reliable for estimating depth extents and resistivities of 3-D structures. When layered earths are used for interpretation, it is advantageous in some cases to use data based on the magnetic field instead of the voltage. A magnetic-field definition of apparent resistivity, in contrast to a definition based on the voltage, eliminates apparent-resistivity overshoots and undershoots in the data. A resistivity undershoot in the data can produce an extraneous and misleading layer in an interpretation of a 3-D resistive structure. Due to 3-D effects, apparent-resistivity soundings (magnetic field and voltage) may rise so steeply at late times that it may not be possible to fit a sounding to a reasonable layered-earth model. Truncating such a sounding, over a buried conductor, allows for a reasonable layered-earth fit and an accurate estimate of the depth to the conductor. However, the resistivity of the conductor is overestimated.
Measurements of the horizontal field in the central-loop configuration can map 3-D structures, provided the sensor is located accurately at the centre of the transmitting loop. Horizontal-field calculations show that the transients peak on the flanks of a 3-D structure, but are depressed over the structure's centre. Weak transient responses flanked by two large transient responses, which are opposite in sign, locate the structure. The sign reversal is caused by a corresponding reversal in the currents that are channelled through or deflected away from conductive or resistive structures, respectively.  相似文献   

滇西地区地壳上地幔电性结构与地壳构造活动的关系   总被引：46，自引：3，他引：43       下载免费PDF全文

孙洁  徐常芳 《地震地质》1989,11(1):35-45

本文根据滇西地区18个大地电磁测深点资料的数据处理和分析结果,对测区深部导电率在纵、横向上的变化特征进行了研究。结果表明:滇西地区深部电性为多层结构,大致可分四至五个电性结构层;深部电性结构横向变化大,明显受区域构造控制;该区上部地壳内普遍存在低阻层;上地幔高导层明显存在两个隆起区,一个以剑川—鹤庆为中心呈北北西向展布的隆起区,另一个以腾冲—潞西为轴呈南北向展布的隆起区。 本文还讨论了地壳上地幔电性结构与大地构造的关系,滇西北裂陷区盆地的形成,以及该区地震活动与深部构造的关系  相似文献   

频率域电磁法中视电阻率全区定义     

方文藻  李貅  李予国  冯兵 《地球科学与环境学报》1992,(4)

视电阻率定义在电法勘探中得到广泛的应用。目前在频率域电磁法中常常采用远区视电阻率定义。由于在频率域中收发距并非足够大,以致在低频段远区定义视电阻率往往不能反映地下电阻率值。我们定义全区电阻率及引入校正系数K,经二层三层模型及野外实测资料的计算,证明了方法的有效性。  相似文献   

甚高频电磁波多参数层析成像技术及其应用研究   总被引：1，自引：0，他引：1  

谭捍华  HUANG Jia-hui  黄家会  罗强  柳治国 《岩土力学》2008,29(12):3307-3310

电磁波速度或衰减层析成像技术单独用于岩溶勘察存在多解性缺陷,降低了应用的准确性.基于电阻率和相对介电常数直接反映溶洞与周围介质存在的电性差异,以电磁波速度和衰减层析成像理论为基础,提出了电阻率和相对介电常数层析成像理论,并应用于实例工程.通过对其电磁波速度、衰减、相对介电常数、电阻率4参数层析成像结果进行对比分析和钻探验证,证明了基于电磁波的电阻率和相对介电常数层析成像技术是可行的,形成了电磁波速度、衰减、相对介电常数、电阻率多参数层析成像综合分析方法,提高了电磁波层析成像技术探测溶洞及其充填情况的准确性.  相似文献   

煤炭资源勘查误差理论研究     

林宣明 《福建地质》2008,27(1):57-72

对煤炭资源勘查资源量与客观物质量之间差值的误差理论探讨,提出误差由真值误差、系统误差和离差3个基本部分组成,其中真值误差是不可消除的观测误差、系统误差是控制网度所决定的准确度标准、而离差是由地质构造及矿床形态的多解性产生的资源量波动。在此基础上,构筑了一个关于误差的数学模型,最后应用误差理论对现行勘查工作中常见的错误进行分析,并就如何避免错误及减少误差提出了见解。  相似文献   

应用电性特征研究银川平原地下水水质空间分布规律     

韩银利  尹秉喜  余秋生  于艳青 《物探与化探》2008,32(3):288-290,287

以蕴涵丰富地下水系统水循环信息的电性特征为线索,采用电测深法,在分析研究银川平原450 m深度内地下水系统的空间结构的基础上,对平原地下水水质空间分布规律进行了综合研究,为银川平原地下水资源可持续利用战略的制订提供了依据。  相似文献   

视电阻率曲线在研究聚煤盆地沉积环境分析及聚煤规律中的应用     

魏喜文  王洪力  王凤春 《吉林地质》2008,27(3)

分析聚煤盆地沉积环境,研究聚煤盆地煤层分布规律,对指导煤田预测和指导勘探工作有着重要的作用。充分利用数字测井的视电阻率曲线来分析、解释原始沉积环境,研究聚煤盆地的煤层分布特点,具有一定的现实意义。  相似文献   

华北地台地热勘探中利用大地电磁测深法(MT)圈定热田范围和探讨地热形成机制     

战双庆  汪启年 《安徽地质》2008,18(1):32-34

利用大地电磁测深法（MT）反映地质体的电性差异,首先可以确定地质体的空间展布、地质结构和构连;而由于地质体电阻率受地热水影响而降低,进而据此圈定地热水的分布范围;并在此基础上可以进一步探讨地热形成机制。在华北地台地热勘探中MT法取得了较好的勘探效果。  相似文献   

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments     

D. Pardo  C. Torres-Verdín  M. Paszynski 《Computational Geosciences》2008,12(1):83-89

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.  相似文献   

Modification of streaming potential by precipitation of calcite in a sand–water system: laboratory measurements in the pH range from 4 to 12     

Xavier Guichet  Laurence Jouniaux  Nicole Catel 《Geophysical Journal International》2006,166(1):445-460

  相似文献